Tips for Installing New Windshield Correctly
You should clean and lubricate the old windshield once you have removed it. You should also use a rag or a piece of cloth to wipe off any remaining glue. Afterward, you should tamp down the new windshield with medium pressure. A professional can do this for you, or you can do it yourself. Here are a few tips to ensure that you install the new windshield correctly.
Ensure that the windshield fits correctly before you install it. If it’s the wrong shape or size, leaks could occur, which could cause the car to be very noisy at higher speeds. Ensure that the glass is of the correct thickness and size. You should also wear rubber gloves to prevent contamination of the windshield glass. After you apply the urethane, you should install the windshield immediately.
After you have installed the windshield, you should prepare the vehicle for post-installation use. If you have used a previous urethane coating, you should apply it again. This will help the urethane bond to the glass better. It is also an excellent corrosion-preventer. Once the windshield has been installed, you should avoid washing the car for 24 hours. This could affect the seals in the windshield.
Then, install the windshield by applying the urethane. A urethane solution is safer for your windshield than silicone, which may cause leaks. You should use a small caulking gun to apply the urethane and apply the glass. If the urethane is too thick, you need to add a bit more. If the gasket is too thin, you can slide the glass into the frame with a spatula.
Once the windshield has been installed, you can apply touch-up paint to the scratches. You can also use a urethane-based primer to protect the glass. Depending on your vehicle’s model, you may want to apply it to the glass first, but make sure it is the correct size and shape. After that, you can use urethane to finish the edges and corners of the windshield.
Once the windshield is in place, you can use a hand-caulking gun to apply a urethane adhesive. Unlike silicone, urethane is safe for your car’s frame. A hand-caulking gun will not create a uniform bead. Moreover, you should be careful not to get the glue on the windows. It will not stick to the glass.